本页的翻译是通过机器翻译完成的。请原谅任何可能的错误。

全卷

4 教训

在本单元中，您将构建 Byte，即 2023-2024 年 VIQRC Full Volume 游戏的 HeroBot，并学习如何得分。在整个单元中，您将学习如何驾驶 Byte 以及如何开始为 Byte 进行自主运动编码，以便您可以在比赛季节参加机器人技能挑战赛。
*需要 IQ（第二代）竞赛套件

请访问教师门户网站，获取有关全卷课程内容和教学的教师支持材料和视频。

全卷教师门户 >

< 返回实验室

Lesson 1: Building and Driving Byte

In this Lesson you will build Byte, the HeroBot for the 2023-2024 Full Volume game and learn how to drive it with the IQ Controller.

A close up image of Byte on the VIQRC Field with a green block in the intake.

Lesson 2: Driving Skills

In this Lesson, you will learn about the Full Volume Competition so that you can compete in a Driving Skills Match.

A close up of Byte on the VIQRC Field with a purple block in the intake.

Lesson 3: Autonomous Coding Skills

In this Lesson, you will learn how to code the drivetrain, intake, and arm of Byte so that you can compete in an Autonomous Coding Skills Match.

A side view of Byte, with the Distance and Optical Sensors on the robot highlighted on the robot.

Lesson 4: Sensors on Byte

In this Lesson, you will learn about the sensors that are a part of Byte. Then you will apply your skills from the previous Lessons and participate in a Robot Skills Challenge.

向上和向下

6 教训

在本单元中，您将探索如何在 Up and Over 比赛中设计一个 Clawbot 来收集、拾取和将立方体从场地的一侧移动到另一侧！

访问教师门户网站，获取有关 Up and Over 课程内容和便利性的教师支持材料和视频。

向上和向下教师门户 >

< 返回实验室

Lesson 1: Introduction

In this Lesson, you will be introduced to the Up and Over competition, set up the Battery and Controller, get ready to code, and build the Clawbot.

A close up view of the Clawbot with a blue cube in its grasp, in front of a green score area on the Field.

Lesson 2: Claw Design

In this Lesson, you will learn what a claw is, how an effective claw works, and how scouting can benefit your team's designs and strategy. Then, you will apply what you have learned in the Grab and Go challenge.

A close up view of the Clawbot on the Field, holding a red cube in the air in the process of stacking it on top of a blue cube on the Tile.

Lesson 3: Arm Designs

In this Lesson, you will learn about different elements of robotic arms, how they work, and what makes an effective arm design, in order to stack as many cubes as you can within a minute in the Stacked Up challenge.

Top down view of the Up and Over Field with the Clawbot in the starting position on the right side of the Field and six Cubes arranged in a pyramid shape starting against the right wall and extending to the center of the right side.

Lesson 4: Motor Groups

In this Lesson, you will learn what motor groups are, how they can be helpful, and how to configure motor groups in VEXcode IQ in order to iterate on your robot to complete the Up and Over challenge.

A close up view of the Clawbot lifting a Blue cube over the barrier, with other cubes in their starting positions behind it.

Lesson 5: Up and Over Competition

In this Lesson, you will apply your learning from the previous Lessons to compete in the Up and Over competition!

Lesson 6: Conclusion

In this Lesson, you will reflect on the Unit and identify connections between what you have done and a STEM career.

机器人足球

4 教训

在本单元中，您将探索如何在机器人上创建一个操纵器，以作为机器人足球运动员在机器人足球比赛中抓取、传球和进球最多！

访问教师门户网站，获取有关机器人足球课程内容和便利性的教师支持材料和视频。

机器人足球教师门户 >

< 返回实验室

VEX IQ 2nd generation Simple Clawbot build.

第 1 课：简介

在本课中，您将构建简单的 Clawbot、为控制器和电池充电并准备编码。

Two Simple Clawbots approach a red Cube on the Field, and the Clawbot on the left grasps it in the claw.

第 2 课：操纵器

在本课中，您将了解被动和主动操纵器和进气设计，以便迭代您的机器人设计并参加一对一机器人足球挑战赛！

A perspective view of one Simple Clawbot holding a red Cube and scoring it off the edge of the Field, while two other Simple Clawbots give chase behind it.

第三课：机器人足球比赛

在本课中，您将运用上一课所学的知识参加机器人足球比赛！

第 4 课：结论

在本课中，您将反思本单元并找出您所做的事情与相关的 STEM 职业之间的联系。

立方体收集器

6 教训

在本单元中，您将探索驾驶员控制和自主挑战之间的区别，同时学习驾驶 Clawbot 并对其进行编码以在立方体收集器竞赛中对立方体进行排序和堆叠！

请访问教师门户，获取有关 Cube Collector 课程内容和便利性的教师支持材料和视频。

立方体收集器教师门户 >

< 返回实验室

Lesson 1: Introduction

In this Lesson, you will be introduced to the Cube Collector competition, build the Clawbot, and get ready to code.

A close up view of the Clawbot on the Cube Collector Field stacking a second blue cube on top of the one attached to the Field. In the upper left corner a controller icon indicates this is done with driver control.

Lesson 2: Driver Control

In this Lesson, you will learn about using the Driver Control program on the IQ Brain so that you can drive the Clawbot to stack and score cubes on the Field and participate in the Speed Stack Challenge.

Lesson 3: Coding for Autonomous Movements

In this Lesson, you will learn about coding your robot for autonomous movements, including how to plan the path of your robot. Then, you will create a VEXcode IQ project to score and stack cubes in the Coding for Cubes autonomous challenge.

A close up view of the scoring area with the Clawbot placing a blue cube in the blue area beside a stack of 2 blue cubes. Behind the robot a single green cube and a stack of two green cubes are in the green area.

Lesson 4: Using Multiple Programs (Autonomous & Driver)

In this Lesson, you will learn about customizing driver controls and how you can use the Controller and VEXcode IQ to optimize your driver strategy for competing in a challenge with driver control and autonomous runs.

A close up image of a Clawbot stacking a fourth blue Cube on top of a pyramid of three in the blue scoring area. Behind it 3 single green Cubes and a stack of 2 are in the green area.

Lesson 5: Cube Collector Competition

In this Lesson, you will apply your learning from the previous Lessons to compete in the Cube Collector competition!

Lesson 6: Conclusion

In this Lesson, you will reflect on the Unit and identify connections between what you have done and a related STEM career.

城堡破坏者

6 教训

在本单元中，您将探索如何使用光学和距离传感器来寻找、撞击和清除立方体“城堡”，以便在 Castle Crasher 比赛中得分！

请访问教师门户网站，获取有关 Castle Crasher 课程内容和便利性的教师支持材料和视频。

城堡破坏者教师门户 >

< 返回实验室

Lesson 1: Introduction

In this Lesson, you will be introduced to the Castle Crasher Competition, build the BaseBot, and get ready to code.

A close up view of the BaseBot at the corner of the raised Field with 3 Cubes falling off the Field to the surface below.

Lesson 2: Castle Crasher No Sensors

In this Lesson, you will learn about calculating angles and changing the velocity of your robot so that you can compete in the Tower Over Challenge.

A close up view of the BaseBot at the edge of the raised Field, having just pushed a green Cube off the Tiles. The Distance Sensor on the front of the robot is highlighted in yellow.

Lesson 3: Castle Crasher + Distance Sensor

In this Lesson you will learn about what the Distance Sensor is and how it can be used on your robot. You will also learn about the [Wait until] block and how it can be used in a VEXcode IQ project. Then you will apply what you have learned to compete in the Cube Crasher Challenge!

A close up of the BaseBot pushing a green cube off the edge of the raised Field, with the Distance and Optical Sensors attached to the front of the robot highlighted in yellow. The Distance Sensor faces forward, and the Optical Sensor is positioned downward.

Lesson 4: Creating Algorithms

In this Lesson, you will learn about the Optical Sensor, and about how to create an algorithm that uses sensor feedback. Then you will code your robot to autonomously find cubes and push them off the Field in the Sweep the Field Challenge.

A close up image of the BaseBot with the Distance and optical Sensors on the front, pushing a stack of two cubes off the corner of the raised Field, with cubes on and off the Field in the background.

Lesson 5: Castle Crasher Competition

In this Lesson you will apply your learning from the previous Lessons to compete in a Castle Crasher competition!

Lesson 6: Conclusion

In this Lesson, you will reflect on the Unit and identify connections between what you have done and a STEM career.

寻宝

5 教训

在本单元中，您将构建和编码带有光学传感器的简单爪机器人，以识别和收集红色立方体，参加寻宝比赛！

访问教师门户网站，获取有关寻宝课程内容和便利性的教师支持材料和视频。

寻宝教师门户 >

< 返回实验室

Lesson 1: Introduction

You will be introduced to the Treasure Hunt competition, build the Simple Clawbot, and get ready to code.

A close up view of the Simple Clawbot with the claw open approaching a red Cube as if to grasp it.

Lesson 2: Claw No Sensor

In this Lesson, you will learn about using Drivetrain and Motion blocks in VEXcode IQ to code your Simple Clawbot to collect and move cubes in the Clawbot Collector challenge.

A close up image of the Simple Clawbot with the claw open, in front of a red Cube, with the Optical Sensor at the base of the claw highlighted in yellow.

Lesson 3: Claw With Sensor

In this Lesson, you will learn about coding the Optical Sensor in order to detect, collect, and move a red cube in the Treasure Mover challenge!

An aerial view of the Simple Clawbot at the edge of the Field delivering two red Cubes in its claws.

Lesson 4: Treasure Hunt Competition

In this Lesson you will apply your learning from the previous Lessons to compete in a Treasure Hunt competition!

Lesson 5: Conclusion

In this Lesson, you will reflect on the Unit and identify connections between what you have done and a STEM career.

拔河

6 教训

在本单元中，您将探索机械优势和质心如何影响 BaseBot 拉动物体的能力，并为拔河游戏设计最佳的机器人！

请访问教师门户网站，获取有关拔河课程内容和便利性的教师支持材料和视频。

拔河教师门户 >

< 返回实验室

Lesson 1: Introduction

In this Lesson, you will be introduced to the Tug of War competition and build the BaseBot.

A side view of the IQ BaseBot with a rope attached to an IQ Kit box, to pull the box forward.

Lesson 2: Pulling Objects with the BaseBot

In this Lesson, you will design a rope attachment to practice pulling objects with your BaseBot. Then you will compete in a Robot Tractor Pull challenge.

A close up perspective view of the BaseBot with a yellow highlight around the gear train added to the rear wheels.

Lesson 3: Using a Gear Train

In this Lesson, you will add a gear train to your BaseBot to explore how different gear configurations affect your robot's ability to pull an object. Then you will compete in a Gear Train Tractor Pull challenge.

A side view of the BaseBot with an attachment of IQ pieces floating above it, with arrows indicating to add the attachment over the geared up wheels on the rear of the robot.

Lesson 4: Adding Mass

In this Lesson, you will add mass to your BaseBot to explore how changing the center of mass affects your robot's ability to pull an object. Then you will compete in a Tug of War challenge.